-
YW Vertical Submersible Sewage Pumps
-
NYP High Viscosity Internal Gear Pumps
-
Petrochemical Process Pumps API 610 YZA
-
CQF Plastic Magnetic Pumps
-
CQB Stainless Steel Magnetic Pumps
-
Vertical pumps for installation inside/outside tanks YZCN and YZCW
-
Magnetic pumps with fluoroplastic lining CQB-F
-
Horizontal chemical centrifugal pumps types IS and IR
-
Geared screw pumps type G
-
YZIS Diesel Single Stage Centrifugal Pumps
-
Corrosion-resistant stainless steel centrifugal pumps SFB and SFBX
-
YCB Type Circular Gear Pumps
-
Vertical magnetic pumps CQB-L
-
Mechanical diaphragm dosing pumps DJ-D
-
DBY Non-Metallic Electric Diaphragm Pumps
-
IH Stainless Steel Chemical Centrifugal Pumps
Petrochemical Process Pumps API 610 YZE
YZE series petrochemical process pumps are designed to API 610 standards and feature a foot-mounted OH2 configuration. With a wide performance range and a variety of intelligent design solutions, these pumps are suitable for pumping most process fluids.
Description
marker
Product Overview
YZE series petrochemical process pumps are designed to API 610 standards and feature a foot-mounted OH2 configuration. With a wide performance range and a variety of intelligent design solutions, these pumps are suitable for pumping most process fluids. YZA series centrifugal pumps for the petrochemical industry are suitable for smoothly transporting clean or particulate-containing liquids, low-temperature or high-temperature liquids, and moderately aggressive or corrosive liquids (such as sulfuric acid, nitric acid, hydrochloric acid, phosphoric acid). They pump solutions of inorganic and organic acids with different temperatures and concentrations; alkaline solutions such as sodium hydroxide and sodium carbonate, at various temperatures and concentrations; various saline solutions; as well as all types of liquid petrochemical products.
Construction drawings
| 1 | Pump housing | 9 | Bearing mounting | 17 | Washer | 25 | Drain pipe |
| 2 | Impeller | 10 | Suspension | 18 | support support | 26 | O-ring |
| 3 | O-ring | 11 | Mounting ring | 19 | Oil glass | 27 | Pump cover |
| 4 | Gasket | 12 | Ball bearing | 20 | Bearing cap | 28 | O-ring |
| 5 | Bushing | 13 | Bearing cap | 21 | Dust seal | 29 | Impeller O-ring |
| 6 | Mechanical seal | 14 | Dust seal | 22 | Bushing | 30 | Pump housing o-ring |
| 7 | Sealing cap | 15 | Val | 23 | Sealing cap | 31 | Threaded insert |
| 8 | Ball bearing | 16 | Bearing nut | 24 | Mechanical seal | 32 | Impeller nut |
Product Features
Insulating housings are available.
The pump design has been improved in accordance with ISO 5199/API 610.
Higher liquid temperatures up to 170 °C.
Increased shaft seal and bearing life with reduced vibration and noise.
Dry shaft design without liquid ingress.
Rear vanes or counterbalance ports with impeller to minimize axial thrust and seal chamber pressure.
Scope of application
1. Oil refineries, petrochemical industry, coal industry and cryogenic technology.
2. Chemical industry, pulp and paper industry, sugar industry and general engineering.
3.Water supply enterprises, desalination plants and power plants.
4.Heating and air conditioning systems, environmental projects, marine vessels and the marine industry.
contact us
Related Popular Products
Vertical magnetic pumps CQB-L
CQB-L Magnetic Drive Vertical Chemical Pump, which is a magnetic coupling centrifugal pump, is a new type of pipeline pump developed by our company based on more than ten years of experience in designing and manufacturing horizontal magnetic pumps. It combines the characteristics of an ISG centrifugal pipeline pump with the advantages of magnetic chemical pumps to ensure leak-free pipeline operation.
YZZW Diesel self-priming pumps
The YZZW diesel engine self-priming pump combines self-priming capabilities with a hassle-free drainage system. Thanks to axial recirculation and external mixing with a wide flow channel of the impeller, it does not require the installation of a foot valve and can pump liquids containing large solids or long fibrous impurities.
Plastic self-priming centrifugal pumps FP and FS
FP (FS) series chemical pumps have a direct coupled design in which the pump body and bracket are connected to the motor flange. The bracket supports the housing and impeller, which are directly connected to the motor via a shaft. The PVDF chemical centrifugal pumps equipped with mechanical seals are designed using international advanced technologies and formulations, using CFR-PP and advanced ARS as pump materials to fully realize their complex design. We offer the following design options with straight and long connections.
RY thermal oil pumps
RY series thermal oil pumps feature rational design, advanced technology, high efficiency, long-term stable operation at high temperatures, leak-proof performance, no need for additional cooling systems, and reliable safety.
Plunger dosing pumps type DZ-X
The DZ-X piston type metering pump directly sucks in or pushes out the working medium through the reciprocating movement of the piston. Since both the piston and seals come into direct contact with the fluid, selecting appropriate piston materials and seal configurations ensures optimal pump performance during operation.
Horizontal chemical centrifugal pumps types IS and IR
Horizontal single-stage end-suction centrifugal pumps type IS and IR for clean water are energy-saving pumps developed as part of a national joint project. IS and IR pumps feature a rear-split design that allows the pump cover and impeller to be removed without removing the suction and discharge lines.
Complete water supply installations with frequency regulation and constant pressure CDLF
Constant water pressure variable frequency control equipment is a new mechatronic water supply equipment that combines frequency variable speed control technology and programmable control in automatic pump control devices, integrating them with a group of motors and pumps.
Mechanical diaphragm dosing pumps DJ-Z
The DJ-Z mechanically driven diaphragm metering pump operates on the principle of a turbine driven worm gear, which drives a mechanical diaphragm. This design is suitable for dosing liquids in low pressure systems. The diaphragm metering pump provides complete isolation between the fluid in the flow and the diaphragm lubrication mechanism of the drive. With its advanced design, it provides infinitely variable flow control from 0-100% to meet various process requirements. It provides precise dosing of corrosive and non-corrosive fluids free of solids.
Sanitary screw pumps type GF
The GF stainless steel sanitary screw pump operates on the principle of counter-rotation of interacting elements with positive displacement. Designed to transport demanding food or pharmaceutical media, its main operating components include an eccentric screw (rotor) and a fixed bushing (stator). The unique geometric configuration of these two components creates separate, sealed chambers.
Single Stage Double Entry Centrifugal Pumps Type S
Centrifugal pumps with horizontally split casing type S/SH are single-stage pumps with double suction. Their key features are a wide range of performance characteristics, high efficiency, reliable operation and long service life. This series of pumps is distinguished by a full range of standard sizes, compact design, small footprint and excellent economic performance.
Mechanical diaphragm dosing pumps DJ-D
The DJ-D mechanical diaphragm metering pump is equipped with key components manufactured by precision casting and CNC machining. The wetted part design ensures leak-free operation. Robust drive components provide exceptional durability. Compact design makes operation and maintenance easy. Flow is easily adjusted using the flow control knob, and installation and routine maintenance are extremely convenient.
CQF Plastic Magnetic Pumps
The CQF engineered plastic magnetic drive pump uses static seals instead of dynamic seals to ensure complete sealing of wetted components. This design completely solves the problems of leaks and dripping during operation. The CQF miniature magnetic drive pump, made of ceramic and reinforced polypropylene, has exceptional corrosion resistance and guarantees complete cleanliness of the transported medium.
NYP High Viscosity Internal Gear Pumps
The NYP High Viscosity Internal Gear Pump is a newly developed positive displacement pump designed to meet the needs of petroleum, chemical, paint, oil, pharmaceutical, paint and food industries. Due to its choice of materials and unique design, this product is widely used for pumping media of varying properties and viscosities.
Petrochemical Process Pumps API 610 YZA
The YZA series of petrochemical process pumps are designed to API 610 standards and feature a centrally supported OH2 ZE pump housing design. Both series use single-stage radial impellers with axial suction and radial discharge. Hydraulic balancing is achieved through front and rear wear rings and balancing holes tailored to the operating conditions.
XBC Diesel Intelligent Fire Pumps
Yangtze River XBC diesel engine intelligent system is an intelligent device jointly developed by our company's specialists. This intelligent mechatronic diesel water pump features features such as self-starting, automatic program control, automatic process control, automatic data acquisition and display, automatic fault diagnosis and display, automatic relay protection, automatic standby detection, automatic scheduled checks, automatic data recording and printing, and automatic network monitoring.
Vertical single-stage pipeline centrifugal pumps ISG and IHG
ISG/IHG single stage vertical pipeline centrifugal pumps are an innovative development of our technical team in collaboration with domestic pump experts. They are based on an optimized hydraulic model using the performance characteristics of IS centrifugal pumps and are a clever combination design based on a standard vertical pump.