-
Non-clogging vertical wastewater pumps LW
-
Liquid ring vacuum pumps type SK
-
Infinitely variable screw pumps type G
-
Vertical multistage centrifugal pumps made of stainless steel (light series) CDL and CDLF
-
Corrosion-resistant stainless steel centrifugal pumps SFB and SFBX
-
IH Stainless Steel Chemical Centrifugal Pumps
-
Sanitary screw pumps type GF
-
Horizontal chemical centrifugal pumps types IS and IR
-
FY Submersible Chemical Pumps
-
Horizontal multistage pumps for feeding DG boilers
-
QJ type borehole pumps
-
Plastic self-priming centrifugal pumps FP and FS
-
YCB Type Circular Gear Pumps
-
YZD Series Diesel Multistage Centrifugal Pumps
-
IHF PTFE Chemical Centrifugal Pumps
-
Vertical magnetic pumps CQB-L
Metal electric diaphragm pumps DBY
DBY metal electric diaphragm pumps are available in cast iron, aluminum alloy, PTFE coated and stainless steel. The DBY series electric diaphragm pumps use cycloidal gear reducers to transmit motion. Using a crankshaft and slider mechanism, they drive a double diaphragm that reciprocates, resulting in alternating changes in the volume of the working chamber and ensuring continuous inlet and outlet of fluid.
Description
marker
Product overview
DBY metal electric diaphragm pumps are available in cast iron, aluminum alloy, PTFE coated and stainless steel. The DBY series electric diaphragm pumps use cycloidal gear reducers to transmit motion. Using a crankshaft and slider mechanism, they drive a double diaphragm that reciprocates, resulting in alternating changes in the volume of the working chamber and ensuring continuous inlet and outlet of fluid. At the same time, recent breakthroughs in diaphragm materials have significantly extended pump life, making it possible to increasingly replace centrifugal and progressive cavity pumps in the petrochemical, ceramics, metals and related industries.
Material selection
Cast Iron: Excellent wear resistance, suitable for non-corrosive liquids such as clean water, waste water and sludge.
Aluminum alloy: Moderately corrosion resistant, not suitable for halogenated liquids. Ideal for conveying non-corrosive solids-free and good flowing liquids such as adhesives, waterborne coatings, oils and ceramic glazes.
Stainless Steel: Provides exceptional corrosion and wear resistance. Suitable for general corrosive acids, alkalis, solvents, pharmaceuticals (eg toluene), food and cosmetics.
PTFE coated: has outstanding acid and alkali resistance and excellent wear-resistant properties. Suitable for strong acids and alkalis, including sulfuric acid, hydrochloric acid, nitric acid, aqua regia and hydrofluoric acid.
Pump body material
PP - polypropylene, engineering plastic
PVDF - polyvinylidene fluoride
Materials of diaphragm, ball and ball seat
Fluoroelastomer, polytetrafluoroethylene (PTFE), nitrile rubber, santoprene, EPDM
Product Features
1.Does not require refueling. Suction height up to 3 meters.
2.Large capacity with excellent passing characteristics, accepts particles up to 10mm in diameter. Minimal wear when pumping slurries or impurities.
3.This pump does not contain any rotating components or shaft seals. The membrane completely isolates the pumped medium from moving parts and operating components, preventing external leakage. Thus, when working with toxic, volatile or corrosive media, it prevents environmental pollution and ensures personnel safety.
4. Capable of transporting relatively viscous liquids (viscosity below 10,000 cP).
5.This pump does not require oil lubrication; Even running dry does not cause any damage to the pump, which is an important advantage.
Specifications
| Model
| Maximum flow L/min | Maximum head m | Maximum suction lift m | export pressure kg | caliber DN | Maximum particle diameter mm | Engine power Kw |
| DBY-15/20 | 16 | 30 | 3 | 3 | 15/20 | 1 | 0.75 |
| DBY-25 | 58 | 30 | 3 | 3 | 25 | 2.5 | 1.5 |
| DBY-40 | 75 | 30 | 3 | 3 | 40 | 2.5 | 1.5 |
| DBY-50 | 108 | 30 | 3 | 3 | 50 | 4.8 | 2.2 |
| DBY-65 | 133 | 30 | 3 | 3 | 65 | 4.8 | 2.2 |
| DBY-80 | 266 | 30 | 4 | 3 | 80 | 6.4 | 5.5 |
| DBY-100 | 333 | 30 | 4 | 3 | 100 | 6.4 | 5.5 |
contact us
Related Popular Products
QBK Non-Metallic Air Operated Diaphragm Pumps
Non-metallic pneumatic diaphragm pumps are made of engineering plastic PP and fluoroplastic PVDF, with aluminum alloy or plastic intermediate components. Suitable for corrosive liquids, acids, alkalis, solvents, toluene, pharmaceuticals, food, cosmetics and similar applications.
ISW and ISWH Single Stage Horizontal Pipeline Centrifugal Pumps
ISW/ISWR/ISWB/IHW/IHWB horizontal centrifugal pumps are highly efficient and energy-saving products designed based on the unique combined design of IS type centrifugal pumps and vertical pumps. They have been optimized using domestic advanced hydraulic models, and based on their structure, a combination design with conventional horizontal pipeline centrifugal pumps has been developed.
YCZ Chemical Process Pumps
YCZ chemical process pump adopts horizontal single stage single suction design. Its dimensions and characteristics comply with DIN 24256/ISO 2858 and GB 5662-85 standards. At the same time, improvements were made to the standard YCZ chemical process pump to meet API 610 standards. These include optimization of seal chamber sizing and design, auxiliary piping systems, running clearances, bearing configurations, shaft stiffness, and material control for feed-through components.
Mechanical diaphragm dosing pumps DJ-Z
The DJ-Z mechanically driven diaphragm metering pump operates on the principle of a turbine driven worm gear, which drives a mechanical diaphragm. This design is suitable for dosing liquids in low pressure systems. The diaphragm metering pump provides complete isolation between the fluid in the flow and the diaphragm lubrication mechanism of the drive. With its advanced design, it provides infinitely variable flow control from 0-100% to meet various process requirements. It provides precise dosing of corrosive and non-corrosive fluids free of solids.
Complete water supply installations with frequency regulation and constant pressure CDLF
Constant water pressure variable frequency control equipment is a new mechatronic water supply equipment that combines frequency variable speed control technology and programmable control in automatic pump control devices, integrating them with a group of motors and pumps.
Gear oil pumps type KCB
KCB gear pumps are suitable for pumping various oils such as heavy oil, diesel fuel and lube oil. When equipped with bronze gears, they can handle low flash point liquids such as gasoline and benzene. Stainless steel gear pumps are suitable for pumping beverages and corrosive liquids, but are not suitable for liquids containing solids or fibres. The applicable viscosity range is from 5×10⁻⁶ to 1.5×10⁻³ m²/s (5-1500 cSt). The maximum operating temperature is 300 °C.
NYP High Viscosity Internal Gear Pumps
The NYP High Viscosity Internal Gear Pump is a newly developed positive displacement pump designed to meet the needs of petroleum, chemical, paint, oil, pharmaceutical, paint and food industries. Due to its choice of materials and unique design, this product is widely used for pumping media of varying properties and viscosities.
RY thermal oil pumps
RY series thermal oil pumps feature rational design, advanced technology, high efficiency, long-term stable operation at high temperatures, leak-proof performance, no need for additional cooling systems, and reliable safety.
Horizontal multistage centrifugal pumps (light series) CHL and CHLF
CHLFs are equipped with a maintenance-free mechanical seal. The pump flow parts are made of stainless steel (304 or 316), and various materials of carbide seals guarantee the absence of leaks when pumping various media; Low noise level: The pump operates smoothly on two low-noise bearings and, with the exception of a weak motor sound, is almost silent.
Metal pneumatic diaphragm pumps QBK
Metal pneumatic diaphragm pumps are available in cast iron, aluminum alloy, PTFE coated and stainless steel with an aluminum alloy intermediate casing. Cast Iron Construction: Excellent wear resistance, suitable for non-corrosive liquids such as clean water, waste water and sludge.
IH Stainless Steel Chemical Centrifugal Pumps
The Type IH chemical pump is a single-stage, single-suction centrifugal pump designed for pumping corrosive liquids with a viscosity similar to that of water and free of solid particles. Its nominal performance characteristics and dimensions are indicated in accordance with international standards.
Single Stage Double Entry Centrifugal Pumps Type S
Centrifugal pumps with horizontally split casing type S/SH are single-stage pumps with double suction. Their key features are a wide range of performance characteristics, high efficiency, reliable operation and long service life. This series of pumps is distinguished by a full range of standard sizes, compact design, small footprint and excellent economic performance.
Sanitary screw pumps type GF
The GF stainless steel sanitary screw pump operates on the principle of counter-rotation of interacting elements with positive displacement. Designed to transport demanding food or pharmaceutical media, its main operating components include an eccentric screw (rotor) and a fixed bushing (stator). The unique geometric configuration of these two components creates separate, sealed chambers.
QW Non-clogging Submersible Sewage Pumps
The QW anti-clogging submersible sewage pump combines advanced German technology and the dedicated efforts of our technical staff to position it among similar products in both the domestic and international markets. This pump is highly energy efficient and has a unique design.
Magnetic pumps with fluoroplastic lining CQB-F
CQB-F Fluorine Lined Magnetic Pump is a newly developed product made in accordance with JB/T7742-95 standard using PVDF as the main material. This material is the most advanced highly corrosion resistant material currently available in the world. It has wide applicability, exceptional corrosion resistance, high mechanical strength, aging resistance and does not emit toxins.
Plunger dosing pumps type DZ-X
The DZ-X piston type metering pump directly sucks in or pushes out the working medium through the reciprocating movement of the piston. Since both the piston and seals come into direct contact with the fluid, selecting appropriate piston materials and seal configurations ensures optimal pump performance during operation.